Kenmore Coldspot 106 Ice Maker Reset and Troubleshooting
Kenmore Coldspot 106 Ice Maker Features
The Kenmore Coldspot 106 refrigerator comes with an ice maker as a standard feature. Here are some key features of the ice maker:
- Automatic ice production: The ice maker in the Kenmore Coldspot 106 refrigerator produces ice automatically, making it easy to have a constant supply of ice on hand.
- Large ice capacity: The ice maker has a large ice capacity, with the ability to produce up to 2.5 pounds of ice per day and store up to 5 pounds of ice in the removable ice bin.
- Ice level control: The ice maker features an ice level control that prevents the ice bin from overflowing. The ice maker will automatically stop producing ice when the bin is full, and will start again when the level of ice drops.
- Water filtration system: Some models of the Kenmore Coldspot 106 refrigerator have a built-in water filtration system that filters out impurities and contaminants from the water supply, ensuring that the ice produced is clean and fresh.
- On/off switch: The ice maker includes an on/off switch that allows you to turn the ice maker on or off as needed.
- Fast ice production: The ice maker is designed to produce ice quickly, so you can have ice available whenever you need it.
Overall, the ice maker in the Kenmore Coldspot 106 refrigerator is a convenient and useful feature that can help you keep your drinks cold and refreshing.
Kenmore Coldspot 106 Ice Maker Reset
To reset the ice maker on a Kenmore Coldspot 106 refrigerator, you can follow these steps:
- Locate the on/off switch for the ice maker. It is typically located on the right-hand side of the ice maker.
- Turn off the ice maker by flipping the on/off switch to the "off" position.
- Unplug the refrigerator from the electrical outlet or turn off the circuit breaker that supplies power to the fridge.
- Wait for at least 30 seconds.
- Plug the refrigerator back in or turn the circuit breaker back on.
- Turn on the ice maker by flipping the on/off switch to the "on" position.
- Wait for the ice maker to cycle and begin producing ice.
If the ice maker still does not work after resetting it, there may be an issue with the ice maker itself or with the water supply to the refrigerator. In this case, it may be best to contact a professional appliance repair technician to diagnose and repair the problem.
Kenmore Coldspot 106 Ice Maker Troubleshooting
If you're experiencing issues with the ice maker in your Kenmore Coldspot 106 refrigerator, here are some troubleshooting steps you can try:
- Check the water supply: Ensure that the water supply to the refrigerator is turned on and that there are no kinks or leaks in the water line.
- Check the water filter: If your refrigerator has a water filter, make sure it is clean and properly installed. A clogged or improperly installed filter can restrict water flow and affect ice production.
- Check the ice maker assembly: Verify that the ice maker is properly installed and aligned with the freezer compartment. Make sure there are no obstructions or ice buildup around the ice maker that could prevent it from functioning properly.
- Check the ice level control board: If your refrigerator has an ice level control board, make sure it is functioning properly. This board regulates the amount of ice produced and may need to be replaced if it is not working correctly.
- Check the ice maker thermostat: The ice maker thermostat controls the temperature in the ice maker and may need to be replaced if it is not functioning properly.
- Reset the ice maker: Try resetting the ice maker by following the steps in the previous answer.
If these troubleshooting steps do not resolve the issue with your Kenmore Coldspot 106 ice maker, you may need to contact a professional appliance repair technician to diagnose and repair the problem. If these troubleshooting steps do not resolve the issue, you may need to contact a professional garage door repair technician for further assistance or Read Kenmore Coldspot 106 User Manual
