Honeywell T6 Pro Hydronic Programmable Thermostat Installation Manual
T6 Pro Hydronic Programmable Thermostat can be used to control the ambient air temperature or floor temperature or both. You can choose among the following temperature control modes.
A mode: Controls and displays the ambient air temperature only.
F mode: Controls and displays the floor temperature only using an external floor temperature sensor. This control mode is suitable for areas such as bathrooms where floor temperature could be scheduled to be warm only during occupied, morning and evening periods.
- Floor temperature is indicated by "FLR" above the actual floor temperature.
- Actual ambient air temperature could also be displayed in the Thermostat P
AF mode: Controls and displays the ambient air temperature as well as maintains the floor temperature within desired floor temperature limits using an external floor temperature sensor. Setting the minimum and maximum floor A, AF mode; main screen temperature limits is a way to enhance Temperatures menu comfort and to protect the floor covering at the same time. Actual floor tem perature could also be displayed in the Thermostat MENU/ TEMP.
NOTE: To set the thermostat temperature control mode, go to "Installer setup (ISU)" on page 7
Readmore and Download Honeywell T6 Pro Hydronic Programmable Thermostat Manual
|Title||: Honeywell T6 Pro Hydronic Programmable Thermostat Manual|
|Pages||: 4 Pages|
|File Size||: 2 MB|