SCOPE OF MAINTENANCE, REPAIR AND SERVICING EXPLANATIONS
1991 Mitsubishi 3000GT Service Repair Manual provides explanations, etc. concerning procedures for the inspection, maintenance, repair and servicing of the subject model. Unless otherwise specified, each service procedure covers all models.
Procedures covering specific models are identified by the model codes, or similar designation (engine type, transaxle type, etc.). A description of these designations is covered in this unit under “VEHICLE IDENTIFICATION”.
SERVICE ADJUSTMENT PROCEDURES
“Service Adjustment Procedures” are procedures for performing inspections and adjustments of particularly important locations with regard to the construction and for maintenance and servicing, but other inspections (for looseness, play, cracking, damage, etc.) must also be performed.
The service steps are arranged in numerical order and attentions to be paid in performing vehicle service are described in detail in SERVICE POINTS.
Troubleshootings are classified into master troubleshooting and group troubleshooting and located as follows:
The master troubleshooting is prepared when the trouble symptom relates to two or more groups and given in MASTER TROUBLESHOOTING.
The group troubleshooting guide is prepared for causes of problems related to that individual group only; a troubleshooting guide is prepared for each appropriate group.
DEFINITION OF TERMS STANDARD VALUE
In 1991 Mitsubishi 3000GT Service Repair Manual Indicates the value used as the standard for judging the quality of a part or assembly on inspection or the value to which the part or assembly is corrected and adjusted. It is given by tolerance.
Shows the standard for judging the quality of a part or assembly on inspection and means the maximum or minimum value within which the part or assembly must be kept functionally or in strength. It is a value established outside the range of standard value.
Indicates the adjustment value prior to starting the work (presented in order to facilitate assembly and adjustment procedures, and so they can be completed in a shorter time).
In 1991 Mitsubishi 3000GT Service Repair Manual, Indicates the presentation of information particularly vital to the worker during the performance of maintenance’ and servicing procedures in order to avoid the possibility of injury to the worker; or damage to component .parts, or a reduction of
component or vehicle function or performance, etc.
INDICATION OF TIGHTENING TORQUE
The tightening torque shown in this manual is a basic value with a tolerance of +lO% except the following cases when the upper and lower limits of tightening torque are given.
(1) The tolerance for the basic value is within + I n o / -
(2) Special bolts or the like are in use.
(3) Special tightening methods are used.
Show 1991 Mitsubishi 3000GT Service Repair Manual on PDF Below