2010 Dodge Nitro Owners Manual

About 2010 Dodge Nitro Owners Manual

Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. 2010 Dodge Nitro Owners Manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle. It is supplemented by a Warranty Information Booklet, located on the DVD, and various customer-oriented documents. Please take the time to read these publications carefully. Following the instructions and recommendations in 2010 Dodge Nitro Owners Manual will help assure safe and enjoyable operation of your vehicle.

When it comes to service, remember that your authorized dealer knows your vehicle best, has factory-trained technicians and genuine MOPAR parts, and cares about your satisfaction.

2010 Dodge Nitro Table of Content

1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE . . . . . . . . . 9
3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE . . . . . . . . .  93
4 UNDERSTANDING YOUR INSTRUMENT PANEL . . . . . . . . . . . . . . .187
5 STARTING AND OPERATING . . . . . . . . . . . . . . . . . . . . . . . . . . . . .289
6 WHAT TO DO IN EMERGENCIES . . . . . . . . . . . . . . . . . . . . . . . . . 385
7 MAINTAINING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . 399
8 MAINTENANCE SCHEDULES . . . . . . . . . . . . . . . . . . . . . . . . . . . .449
9 IF YOU NEED CONSUMER ASSISTANCE . . . . . . . . . . . . . . . . . .  469
10 INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..479

2010 Dodge Nitro Customer Key Programming

If you have two valid Sentry Keys, you can program new Sentry Keys to the system by performing the following procedure:

  1. Cut the additional Sentry Key Transponder blank(s) to match the ignition switch lock cylinder key code.
  2. Insert the first valid key into the ignition switch. Turn the ignition switch to the ON position for at least three seconds, but no longer than 15 seconds. Then, turn the ignition switch to the LOCK position and remove the first key.
  3. Insert the second valid key into the ignition switch. Turn the ignition switch to the ON position within 15 seconds. After 10 seconds, a chime will sound. In addition, the Vehicle Security Light will begin to flash. Turn the ignition switch to the LOCK position and remove the second key.
  4. Insert a blank Sentry Key into the ignition switch. Turn the ignition switch to the ON position within 60 seconds. After 10 seconds, a single chime will sound. In addition, the Vehicle Security Light will stop flashing. To indicate that programming is complete, the Vehicle Security Light will turn on again for three seconds and then turn off. The new Sentry Key is programmed. The Remote Keyless Entry (RKE) transmitter will also be programmed during this procedure.

Readmore and Download 2010 Dodge Nitro Owners Manual PDF Below

2010 Dodge Nitro Owners Manual

 


Download PDF