Bosch Room thermostat II Quick Instructions Manual
Product Description
The room thermostat II measures the temperature at a suitable location in the room and ensures a more stable and efficient temperature control. It is the perfect complement to your Bosch Smart Home radiator thermostats.
Product Overview
|
Item |
Name |
Explanation |
|
1 |
Device front view |
|
|
2 |
LED display |
|
|
3 |
Status LED |
|
|
4 |
Rotary knob/system button |
|
|
5 |
Device rear view |
|
|
6 |
Sensor connection |
Connection for optional accessories. |
|
7 |
Mounting bracket receiving openings |
For different angles of inclination of the device. |
|
8 |
Battery compartment |
Ensure correct polarity when inserting the batteries! |
|
9 |
Mounting plate |
Used to attach the device to the wall. |
|
10 |
Mounting bracket |
Used to install the device on even surfaces. |
LED display (2)
|
Item |
Name |
Description |
|
a |
Information area |
Displays error codes or other additional informa- tion. |
|
b |
Humidity |
Displays room humidity in normal operation. |
|
c |
Status indicators |
|
|
|
Battery status |
Appears with low battery charge |
|
|
Connection status |
Wireless connection to the controller is active. In the event of constant flashing, there is a connection problem with the controller. |
|
|
Child lock |
Press the system button >3 seconds, adjust the desired value by turning |
|
|
Open window |
The system has detected an open window in the room. Heating/cooling mode paused. |
|
d |
Cooling mode |
The device/system is set to cooling mode. |
|
e |
Heating mode |
The device/system is set to heating mode. |
|
f |
Room control modes (press system button 1x, select mode) |
|
|
|
Automatic |
Room control is controlled via a schedule. |
|
|
Manual |
Temperature at constant value. Can be changed via rotary knob. |
|
|
Heating break |
The regulation in the room pauses. |
|
g |
Value display |
Displays actual and set temperature. Other text information in case of an error or during configura- tion. |
The status LED (3) shows the status of the room ther- mostat using flashing codes.
|
Signal |
Meaning |
Measures |
|
Flashes orange |
Pairing mode (is active) or device is communicat- ing with the controller |
Please wait |
|
Flashes green |
Pairing mode (successful) or process confirmed |
|
|
Flashes red 1x |
Pairing mode (not successful) or process failed |
If this is the first tun- ing attempt, please try again. Otherwise reset the device to the factory settings and contact the service department if necessary. |
|
Flashes red every 15 sec- onds |
Functional error |
Look for informa- tion in the Smart Home app. Contact the service team if necessary. |
Start-up
Ensure that you have a Bosch Smart Home control- ler and the Bosch Smart Home app and have suc- cessfully configured both. Now start the Bosch Smart Home app and select “Add new device”. Follow the instructions in the app.
Resetting to factory settings
You can reset the device to its factory settings as follows:
Open the battery compartment (8) and remove one of the batteries. Replace the battery while holding the rotary knob (4) pressed. Hold the knob pressed until the status LED (3) on the room thermostat flashes orange and “RES” appears on the display. Now release it briefly and press the knob again and hold until the LED lights green. The device then restarts. Please note that it can take a few seconds until the room thermostat is ready for operation again.
When resetting to factory settings, the settings and information are only lost from the device and not from the Bosch Smart Home controller. To re-configure the device, first delete it in the device management section of the Bosch Smart Home app and then add it again in the usual configuring process.
Maintenance and cleaning
Removing or changing the battery
To remove or replace the batteries, remove the device from the mounting plate (9) or first remove the mounting bracket (10). Open the battery compart- ment(8). Remove the batteries. Take care to ensure the correct polarity when replacing them.
The device does not require maintenance. Leave any repairs to a specialist. Clean the device with a soft, clean, dry and lint-free cloth. When cleaning, do not use any cleaning agents containing solvents.
Technical Data
|
Device type designation |
BTH-RM |
|
Protection type |
IP21 |
|
Ambient temperature |
0 – 50 °C |
|
Max. humidity |
80 % (non-condensing) |
|
Dimensions (W × H × D) |
86 × 87 × 28 mm |
|
Weight (without batteries) |
85 g |
|
Radio protocol |
ZigBee 3.0 |
|
Radio frequency band |
2.4 – 2.4835 GHz |
|
Max. transmitting power |
10 dBm |
|
Radio range in the open |
< 100 m |
|
Software class |
A |
|
Receiver category |
2 |
|
Batteries |
4 × 1.5 V Micro/AAA/LR3, alkaline |
|
Battery lifespan (typical) |
< 2 years |
Readmore and Download Bosch Room thermostat II Quick Instructions Manual
| Title | : Bosch Room thermostat II Quick Instructions Manual |
| Format | |
| Pages | : 13 Pages |
| Language | : English |
| File Size | : 208 KB |
