Craftsman ys 4500 Operators Manual
CONGRATULATIONS on your purchase of a new tractor. It has been designed, engineered and manufactured to give you the best possible dependability and performance. Should you experience any problem you cannot easily remedy, please contact a Sears or other qualified service center. We have competent, well-trained representatives and the proper tools to service or repair this tractor. Please read and retain this manual. The instructions will enable you to assemble and maintain your tractor properly. Always observe the "SAFETY RULES".
When operated and maintained according to all supplied instructions, if this riding equipment fails due to a defect in material or workmanship within two years from the date or purchase,call1-800-4-MY HOME® to arrange for free repair. Also,when operated and maintained according to all supplied instructions, Warranty will also cover defects in material and workmanship of the Frame and Front Axle for five years from the date o fpurchase.
Craftsman ys 4500 Table of Content
Service and Adjustments................
Craftsman ys 4500 Spesification
|Gasoline Capacity Type:||3 Gallonsand UnleadedRegular|
|Oil Type SAE API-SG-SL||
SAE 30 (above32°F)
|Oil Capacity:||W/FO Filter: 64oz.
W/O Filter: 60oz.
|Spark Plug:||Champion QC12YC (Gap:.030")|
|Ground Speed||Forward: 0-5.5
|Charging System:||3 Amps Battery
5 Amps Headlights
Craftsman ys 4500 ASSEMBLY
Your new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. When right or left hand is mentioned in this manual, it means, from your point of view, when you are in the operating position (seated behind the steering wheel).
TO REMOVE TRACTOR FROM CARTON UNPACK CARTON
1. Cut along dashed lines on all four panels of carton. Remove end panels and lay side panels flat.
2. Remove protective materials from tractor hood and grille.
IMPORTANT: Check for and remove any staples in skid that may puncture tires where tractor is to roll off skid.
Craftsman ys 4500 CHECK BATTERY
1. Lift hood to raised position.
NOTE: If this battery is put into service after month and year indicated on label (L) (label is located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY" in Maintenance section of this manual for charging instructions).
Craftsman ys 4500 TOOLS REQUIRED FOR ASSEMBLY
A socket wrench set will make assembly easier. Standard wrench size sarelisted.
(1)1/2" wrench Tire pressure gauge
(2)7/16"wrenches Utility knife Pliers
When right or left hand is mentioned in this manual,it means when you are in the operating position (seated behind the steering wheel).
Readmore and Download Craftsman ys 4500 Operators Manual PDF
|Title||: Craftsman ys 4500 Operators Manual|
|Pages||: 68 Pages|
|File Size||: 24 MB|