CANON PIXMA iP2200 SERVICE MANUAL
1. PRODUCT LIST
2. PRODUCT SPECIFICATIONS
3. ERROR DISPLAY
Errors are displayed by the LEDs, and ink low warnings are displayed by the Status Monitor.
4. SERVICE MODE
To conduct the following functions, a host computer (Windows 98 / ME / 2000 / XP), printer driver and service tool (QY9-0068) for the iP2200, iP1600, and iP1200 are needed (though the stand-alone print function is available). If an error has occurred in the printer, the service tool cannot be used as it is. To use the service tool, set the printer in the special mode, following the procedures below.
<Special mode setting procedures>
With the ink cartridges installed, while pressing and holding the Power button, connect the AC plug. After the Power LED lights in green, with the Power button still pressed, press the Resume/Cancel button 2 times, and release both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.)
5. EXTERNAL VIEW / PARTS LIST (for Asia)
7. SPECIAL NOTES ON SERVICING
8. PRODUCT TECHNICAL INFORMATION
APPENDIX 2: CANON PIXMA iP2200 SERVICE TOOL
Information in this Canon PIXMA iP2200 Service Manual is subject to change as the product is improved or redesigned. All relevant information in such cases will be supplied in Service Information Bulletins. A thorough understanding of this printer, based on information in this Manual and Service Information Bulletins, is required for maintaining its performance and for locating and repairing the causes of malfunctions.
Show Canon PIXMA iP2200 Service Manual on PDF Below