SENSI EMERSON TOUCH SMART THERMOSTAT Manual Operation
SENSI EMERSON TOUCH SMART THERMOSTAT BUTTONS AND ICONS
The Sensi Touch Smart Thermostat can be operated through Wi-Fi using the Sensi app or it can be operated at the actual wall unit. Advanced features such as thermostat settings, scheduling and email alerts are only available through the Sensi app.
- MENU Access thermostat configurations.(See page 5 for more details).
- CURRENT ROOM TEMPERATURE The room temperature at the thermostat.
- UP ARROW Adjusts the temperature set point or thermostat configuration.
- CURRENT SET TEMPERATURE Current set temperature the thermostat will maintain.
- DOWN ARROW Adjusts the temperature set point or thermostat configuration.
- FAN Switches fan mode from Auto or On. Leave the fan mode on Auto to allow the thermostat to control the fan as necessary.
- HUMIDITY Displays current humidity
- MODE Switches system mode between Heat, Cool, Off, Aux or Auto.
- TIME DIsplays current time.
SENSI EMERSON TOUCH SMART THERMOSTAT BASIC FUNCTIONALITY
Switching system mode
Press the mode button (see buttons and icons) to switch between all available system mode settings. When the mode is “Off” the thermostat will not bring on your heating or cooling systems.
If you want to circulate the indoor blower, you can switch fan mode to “On.” Turn the fan back to “Auto” when you want the thermostat to control your indoor blower as necessary. Leaving the fan in “On” will run your blower continuously.
Holding one temperature
If you want to hold one temperature, turn Schedule “Off.” Then, adjust the set point using the up and down arrow buttons. The thermostat will hold this temperature, in the set system mode, until you turn Schedule back “On” or until you adjust the set point again using the up and down arrow buttons.
When your Schedule is “On,” your Sensi thermostat controls your home based on the time and temperature settings in the current schedule. To temporarily change your temperature, use the up and down arrows in the app or on the thermostat. Your Sensi thermostat will display the time it will hold for next to the set temperature. It will hold your new temperature until the next scheduled set point with a minimum hold time of two hours.
SENSI EMERSON TOUCH SMART THERMOSTAT MENU SETTINGS
You can access several settings and options about your thermostat in the menu
Note: The “Time Setup” sub menu will only be available when Wi-Fi is turned “off.”
You have the option to display the room temperature even when the Sensi Touch screen goes to sleep. Simply toggle your selection from this menu.
This light can be used to help you see your wiring and terminals when installing the thermostat on the wall. The switch is on the thermostat base. Be sure to turn the light to “off” before snapping the thermostat face to the base.After installation, you have the option to toggle the back glow on and off from the thermostat menu to help light the area near the thermostat.Note: The back glow switch on the thermostat base must be in the “off” position for this feature to work via the thermostat menu
Readmore and Download SENSI EMERSON TOUCH SMART THERMOSTAT Manual Operation
|Title||: SENSI EMERSON TOUCH SMART THERMOSTAT Manual Operation|
|Pages||: 12 Pages|
|File Size||: 1 MB|