Epson l200/l100 Series Service Manual

About This Epson l200/l100 Series Service Manual

Epson l200/l100 Series Service Manual, consists of the following chapters, is intended for repair service personnel and includes information necessary for properly performing maintenance and servicing the product.

Epson l200/l100 Table of Content

CHAPTER 1. DISASSEMBLY / REASSEMBLY
Describes the disassembly/reassembly procedures for main parts/units of the product, and provides the standard operation time for servicing the product.
CHAPTER 2. ADJUSTMENT
Describes the required adjustments for servicing the product.
CHAPTER 3. MAINTENANCE
Describes maintenance items and procedures for servicing the product.
CHAPTER 4. APPENDIX
Provides the following additional information for reference:

  • Power-On Sequence
  • Connector Summary
  • Troubleshooting

Epson l200/l100 Overview

This chapter describes procedures for disassembling the main parts/units of L200/L201/L100/L101. Unless otherwise specified, disassembled parts/units can be reassembled by reversing the disassembly procedure. See the cautions or tips for disassembly/reassembly described in “ 1.3 Details of Disassembling/Reassembling by Parts/Unit (p23)”. Read the following before disassembling and reassembling.

  • Safety Precautions (p3)
  • 1.1.2 Checks and precautions before disassembling (p10)

When you have to remove units or parts that are not described in this chapter, see the exploded diagrams of SPI (Service Parts Information).

Checks and precautions before disassembling

Ink may spill when removing the following parts from L200/L201/L100/L101. This section describes the parts that may cause ink spill and the means to minimize the ink spill when removing the parts.

  1. The parts that may cause ink spill when removing
  2. Means do to minimize the ink spill

Epson l200/l100 Protection for Transportation

Before packing the printer for returning it to the user, secure it at the specified points with strong tape to avoid
damaging the printer or ink leakage during transport, and make sure to check the points as follows.

Securing each parts

Secure the following parts with strong tape (width: 22 mm).

  • Securing the Carriage Assy
    • Cofirm that the Carriage Assy is locked in the home position.
    • Attach the unfolded end of strong tape (fold the other end back 5 mm) on the bottom left of the CR Cover.
    • Pull the tape to the right side of the housing and attach it tightly.

see picture on manual pdf below

  • Securing the Ink Tank
    • Secure both sides of the Top Cover with strong tape (x2).
    • Secure the Ink Supply Tank Assy and Ink Supply Holder Assy with strong tape (x1).

Epson l200/l100 Disassembly/Reassembly Procedures

This section describes procedures for disassembling the parts/units in a flowchart format. For some parts/units, detailed procedures or precautions are provided (accordingly indicated by icons and cell's color). Refer to the explanations in the example chart below and perform an appropriate disassembling and reassembling procedure. (See“ 1.3 Details of Disassembling/Reassembling by Parts/Unit (p23)”.) For routing cables, see “ 1.4 Routing FFCs/cables (p31)”

Read More Epson l200/l100 Series Service Manual pdf Below

Epson l200/l100 Series Service Manual