• Home
  • Manuals Epson
  • Epson L350/351, L300/301, L355/358 L210/211, L110/111 Service Manual

Epson L350/351, L300/301, L355/358 L210/211, L110/111 Service Manual

About Epson L350/351, L300/301, L355/358 L210/211, L110/111 Service Manual

Epson L350/351, L300/301, L355/358 L210/211, L110/111 Service Manual, consists of the following chapters, is intended for repair service personnel and includes information necessary for properly performing maintenance and servicing the product.

Table Of Content

CHAPTER 1. TROUBLESHOOTING

Describes the step-by-step procedures for the troubleshooting.

CHAPTER 2. DISASSEMBLY / REASSEMBLY

Describes the disassembly/reassembly procedures for main parts/units of the product, and provides the standard operation time for servicing the product.

CHAPTER 3. ADJUSTMENT

Describes the required adjustments for servicing the product.

CHAPTER 4. MAINTENANCE

Describes maintenance items and procedures for servicing the product.

CHAPTER 5. APPENDIX

Provides the following additional information for reference:

  • Connector Diagram
  • Points to be checked before packing the printer
  • Protection for Transportation

Epson L350/351, L300/301, L355/358 L210/211, L110/111 Service Manual Troubleshooting

This section describes the troubleshooting workflow and fatal error information.

In this chapter, the product names are called as follows:

  • L350 Series: L350/L351
  • L300 Series: L300/L301
  • L355 Series: L355/L358
  • L210 Series: L210/L211
  • L110 Series: L110/L111

Epson L350/351, L300/301, L355/358 L210/211, L110/111 Service Manual Troubleshooting Workflow

The following page describes the troubleshooting workflow. Follow the flow when troubleshooting problems.

Power-On Sequence

This section describes the power-on sequences in two conditions. The preconditions are as follows.

  • Condition 1: Normal power-on sequence (See Table 1-1.)
  • Turning on the printer after turning it off without an error.
  • Initial ink charge has finished and every cartridge has sufficient ink.
  • No paper on the paper path.
  • The Printhead is capped with the Cap Assy.
  • The CR Unit is normally fixed by the Change Lever.
  • Maintenance error recovery has never been performed.

Read More Epson L350/351, L300/301, L355/358 L210/211, L110/111 Service Manual on PDF Below

Epson L350/351, L300/301, L355/358 L210/211, L110/111 Service Manual