Honeywell MV100 Electric Controllers T100, T200 Thermostatic Controllers and V2000 Radiator Valves

Honeywell MV100 Electric Controllers T100 Product Data

Honeywell MV100 Electric APPLICATION

The MV100, T100, T200 Controllers, when paired with V2000 Radiator Valves, provide automatic temperature control by modulating the flow of steam or hot water through freestanding radiators, convectors, and other heating units. They provide comfort and energy savings at affordable prices.

Honeywell MV100 Electric FEATURES

  • •Continually monitors and adjusts room temperature for consistent comfort and relief from underheating and overheating.
  • T100,T200 Controllers include sensor, setpoint dial and valve actuator; components can be integral or connected by capillary tubing.
  • T100,T200 Controllers require no electrical connections.
  • T100A,F,M models have range limiting features to limit adjustment or lock at a fixed setting (can require limit pin accessory).
  • EPDM valve seat disk assures tight shutoff on steam and hot water systems.
  • Nickel-plated bronze cast valve body.
  • Cartridge containing all working parts inserts into valve body for ease of service.
  • Cartridges are replaceable while valves remain in service and under pressurE (WITH accessory service tool MT100C).
  • Valves remain normally open with no control mounted.
  • Valves can be used with T100, T200 Thermostatic or MV100 Electric Controllers.

Honeywell MV100 Electric Table Contents

Application ..................................................................... 1
Features .........................................................................1
Specifications ................................................................. 2
Ordering Information ........................................................ 2
Installation ..................................................................... 5
Wiring (MV100 only) ........................................................9
Operation ........................................................................9
Settings and Adjustments ................................................9
Single-Pipe Steam Applications .......................................10
Troubleshooting ..............................................................12
Pressurized Valve Cartridge Replacement ....................... 13 

SPECIFICATIONS

MV100 Electric Controller SPECIFICATIONS

Dimensions: See Fig. 1.

Materials:
Body: Industrial grade plastics with low thermal conductivity.
Fastening Ring: Plated brass.
Internal Parts: Brass thermostat capsule, other metals.
Thermal element: Wax-filled brass capsule.

Electrical Ratings:
Control Type: Spst switch.
Controller:
Voltage: 24 Vac, 60 Hz, or 24 Vdc.
Power Consumption: 0.125A, 3W.
End Switch: Low-voltage (24 Vac, 5A), two-position, spst,
normally open switch (closes when controller powered).

Configuration (with Controller Mounted):
Normally closed (valve remains closed without power).
NOTE: Normally open model available in Canada.
Opening Time (at 78°F): Maximum: 5 minutes from cold to fully open.
Ambient Temperature Rating: Maximum: 122°F (50°C).

T100,T200 Thermostatic Controllers SPECIFICATIONS

Models: See Table 1.

Dimensions: See Fig. 1.
Power: Self-powered, no electrical connections.
Components: Sensor, setpoint dial and valve actuator.

Materials:
Body: Industrial grade plastic with low thermal conductivity.
Fastening Ring: Plated brass.
Internal Parts: Brass thermostat capsule, other metals.
Thermal Element:
T100A,M: Wax.
T200,T100B,C,F: Liquid Ethyl Acetate (non-toxic, flammable).

Temperature Ratings:
Range: 43°F to 79°F (6°C to 26°C).
Maximum: 125¼F (52¼C).

V2000 Valves SPECIFICATIONS

Models: See Table 2.

Dimensions: See Fig. 2 and 3.

Materials:
Body: Bronze.
V2040A (1/2 in.): Brass.
Union: Brass.
Stem Seal: Double EPDM seal.
Cartridge: Brass and stainless steel with EPDM seat disk.
NOTE: Apply 25 ft.-lb. (30 N•m) torque when installing the valve cartridge.

Maximum Temperature Rating: 266°F (130°C).

Maximum Pressure Ratings:

System:
Water: 145 psi (10 bar).
Steam: 15 psi (103 kPa).
Differential:
With MV100 Controller: 36 psi (248 kPa).
With T100 or T200 Controller: 14.5 psi (1 bar).
For Low Noise: 2.9 psi (20 kPa).

Sizes:

V2024H: 1/8 in.
V200LD: 1/2 in., 3/4 in.
V2040D,E,A: 1/2 in., 3/4 in., and 1 in.

Table 1. T100,T200 Models.

Model

Control Range

Mounting

Capillary

Description

T100A

43°F to 79°F (6°C to 26°C)

Directa

None

Components are in one unit.

T100B

48°F to 79°F (9°C to 26°C)

Remote

One 6-1/2 ft (2 m) or 16 ft (5 m)

Sensor and setpoint dial combined and remote from valve actuator.

T100C

 

Remote

Two 4-1/2 ft (1.4 m)

Components mount remotely from each other.

T100F

43°F to 79°F (6°C to 26°C)

Direct with remote sensor.

One 6-1/2 ft (2 m)

Sensor is remote from combination setpoint dial and valve actuator.

T100M

 

Directa

None

Components are in one tamper-resistant unit.

T200A

 

Directa

None

White body with chrome-plated end.

a Mount the unit horizontally on the valve body for accurate temperature regulation. 

Table 2. V2000 Models.

 

Model

 

Body Pattern

Connection

 

Application

Inlet

Outlet

V2040D

Straight

NPT

Threaded

Union Nut with NPT Threaded or Sweat

Use where manual valves were not originally installed.

V2040E

Angle

Typically used with remote temperature sensing controllers.

V2040A

Horizontal Angle

Typically used with direct-mount controllers (T100A,M; T200A)

V200LD

Straight

Sweat

Sweat

Use with copper tubing installations.

V2042H/ V2043H

One-Pipe

18 in. NPT

1/8 in NPT for SA123A Vent

Use in single-pipe steam applications.

 

Readmore and Download Honeywell MV100 Electric Controllers T100 Product Data PDF Below

Honeywell MV100 Electric Controllers T100 Product Data