Honeywell FocusPRO® 5000 Series Installation
Honeywell FocusPRO® 5000 Wallplate installation
Remove the wallplate from the thermostat, then follow directions below for mounting.
- Remove battery holder.
- Pull here to remove wallplate from new thermostat.
- Pull wires through wire hole.
- Position wallplate on wall, level and mark hole positions with pencil.
- Drill holes at marked positions as shown below, then tap in supplied wall anchors.
- Place wallplate over anchors, insert and tighten mounting screws.
Honeywell FocusPRO® 5000 Power Option
Read More and Download Honeywell FocusPRO® 5000 Series Installation Manual Manual PDF Below
