Honeywell HERMetic DIP2 all versions
Recommendation for safe use
The HERMetic DIP Type 2 is designed for checking that the bottom of closed and inerted tanks is dry and free of deposits after crude oil washing. It consists of a graduated brass/stainless steel weight attached to a graduated stainless steel tape wound up on reel and an adapter for connecting a HERMetic valve. The operation is carried out with reduced escape of gas from the tank to the atmosphere.
The I.M.O. requirements on Tanker Safety and Pollution Prevention, 1978 - resolution A.446 (XI) - § 4.4.4 :
“Means such as level gauges, hand dipping, and stripping system performance gauges as referred to in paragraph 4.4.8. shall be provided for checking that the bottom of cargo tanks are dry after the crude oil washing. Suitable arrangements for hand dipping must be provided at the aftermost portion of a cargo tank and in three other suitable locations.”
This Operation and Service Manual is a guide in order to help the user to operate the instrument safely and correctly. Nevertheless the maker disclaims all responsibility and liability for damage resulting from the use of the equipment regardless of the cause of the damage.
This product and his use is / may be related to international, national, local or company regulations or standards. It is the customer / user responsibility to ensure that the way to use the device complies with such applicable regulations or standards.
This device is a portable product. It must not be permanently installed on the tank and must be disconnected after use and stored in a safe and dry area.
Show Honeywell HERMetic DIP2 all versions Operation and Service Manual On PDF Below