Honeywell RCT8100 Programmable Thermostat Installation Manual
Honeywell RCT8100 Installation is Easy
Your new thermostat has been designed for fast and easy installation. Just follow the simple step-by-step instructions in the following pages.
- Identify your system type.
- Remove your old thermostat.
- Identify the wires.
- Mount the new wallplate.
- Connect the wires.
- If the wire labels don’t match.
- Specify the furnace type.
- Install the batteries.
- Install the thermostat.
- Set the system.
Honeywell RCT8100 Identify System Type
This thermostat is compatible with the following systems:
- Gas, oil or electric furnace
- Central air conditioner
- a hot water system with or without pump
- a millivolt system
- a central heating and cooling system
If you are not sure of your system type or if you have any other questions, call us toll-free at 1-800-468-1502.
Readmore and Download Honeywell RCT8100 Programmable Thermostat Installation Manual PDF Below