Honeywell Smart Programmable Thermostat RTH6500WF Smart Series Manual

Honeywell Thermostat RTH6500WF Smart Series Manual

This thermostat works with common 24 volt systems such as forced air, hydronic, heat pump, oil, gas, and electric. It will not work with millivolt systems, such as a gas fireplace, or with 120/240 volt systems such as baseboard electric heat

MERCU RY NOTICE: Do not place your old thermostat in the trash if it contains mercury in a sealed tube. Contact the I hermostat Recycling Corporation at www.thermostat-recycle.org or 1-800-238-8192 for information on how and where to properly and safely dispose of your old thermostat.

NOTICE: lo avoid possible compressor damage, do not run air conditioner if the outside temperature drops below 5CPF (100 C).

In the box you will find

  • Thermostat
  • Wallplate (attached to thermostat)
  • Screws and anchors
  • Quick Start Guide
  • Thermostat ID Card
  • Wire labels
  • User Guide
  • Quick Reference Card

Honeywell Thermostat RTH6500WF Features of your thermostat

With your new thermostat, you ca n:

  • Connect to the Internet to monitor and control your heating/cooling system
  • View and change your heating/cooling system settings
  • View and set temperature and schedules
  • Receive alerts via email and get automatic upgrades

Your new thermostat provides:

  • Smart Response Technology
  • Compressor protection
  • Heat/cool auto changeover

Honeywell Thermostat RTH6500WF Controls and home screen quick reference

Once your thermostat is installed, it will display the home screen. Portions of this display will change depending on how you are viewing it.

 How to preset energy-saving schedules Honeywell Thermostat RTH6500WF

This thermostat is pre-set with energy-saving program settings for four time periods. Using the default settings can reduce your heating/cooling expenses if used as directed. Savings may vary depending on geographic region and usage. To change the settings, see pages 15.

 

Default Heat Settings

Default Cool Settings

WAKE 6:00 am

70°

78°

LEAVE 8:00 am

62°

85°

RETURN 6:00 pm

70°

78°

SLEEP 10:00 pm

62°

82°

Controls and home screen quick reference

Once your thermostat is installed, it will display the home screen. Portions of this display will change depending on how you are viewing it.Honeywell Programmable Thermostat RTH6500WF

The screen lights when you press any button. It stays lit for 8 seconds after you com plete changes.

 How to Set up Honeywell Thermostat RTH6500WF

Honeywell RTH6500WF manual wifi setup, Setting up your programmable thermostat is easy. It is preprogrammed and ready to go as soon as it is installed and registered.

  1. InstaIl your thermostat
  2. Connect your home Wi-ki network
  3. Register online for remote access.

Readmore and Download Honeywell Thermostat RTH6500WF Smart Series Manual

Title : Honeywell Thermostat RTH6500WF Smart Series Manual
Format : PDF
Pages : 56 Pages
Language : English
File Size : 5 MB

 

 Honeywell Thermostat RTH6500WF Smart Series Manual