Honeywell T10 Pro Smart User Manual

T1O Pro Smart thermostat with RedLINK User Guide

T1O Pro Smart thermostat Thermostat Features

Flexible scheduling: You can choose to use location-based temperature conool (geofence technology), program a set schedule or use a combination of both to make sure your home is always comfortable.

  • Location-based temperature control: Using geofence technology. the TIO Pro Smart thermostat will automatically use your smartphone’s location. which can save you energy when you leave and make your home comfortable by the time you return.
  • Smart Scheduling: Adds a Sleep period to location-based temperature control.
  • Time-based scheduling: You can program a schedule where every day is different, a schedule where weekdays and weekends are different or a schedule where every day is the same. I here are four adjustable periods per day: Wake, Away, Home, and Sleep.
  • No schedule: You can also choose not to set a schedule and adjust the thermostat manually.
  • You can also choose not to set a schedule and adjust the thermostat manually
  • Schedule Using Sensors
  • Up to 2O wireless indoor temperature/humidity/motion sensors per thermostat.
  • Sensor Priority for each program period or when used manually.

Tip: I he Honeywell Home app can be used to manage multiple thermostat and multiple users in a household.

Smart Alerts: I he I 1U Pru brrlart therrrlustat will send alerts fur things like ext:rerr1e i rlduur terrlperatures and rerrlirlders fur things like filter changes.

Auto change from heat to cool: When Autu mode is selected, the T10 Pro Smart Thermostat Can Automatically determine whether your home needs heating or cooling to reach the desired temperature.

Adaptive Intelligent Recovery:the T10 Pro Smart Thermostat learns your heating and cooling cycle times to make sure the system delivers the temperature you want, when you want it.

Getting the most from the T10 Smart Thermostat

Prioritize Rooms - Prioritize a specific room or multiple rooms, or let comfort follow your move using built-in motion detection.
Control on the Go - Adjust your thermostat from anywhere using your tablet or smartphone.
Save Energy - With geofencing, you can save money on the most expensive part of your energy bill while you’re away.
Simple Installation - The thermostat automatically programs itself. Just answer a few simple questions and you’ll be up and running in no time.
Whole-Home Range - With a 200-foot range, 20 sensors with temperature, humidity, and occupancy detection can connect to your thermostat from throughout your home.
Know Your Home Is Safe - Get customizable alerts on your mobile device when the basement is so cold a pipe could burst, or if the baby’s room is getting too hot.

Using Your T10 Smart Thermostat

The screen will wake up by pressing the center area of the displayed temperature.

T10 Smart Thermostat Program

Using the Honeywell Home App

Using the Honeywell Home App

Main Menu on Thermostat
From Home Screen, press the menu icon at bottom of the display (3 horizontal lines). If this is not shown at home screen, touch screen to wake display first.

Main Menu options
System mode (Available modes vary depending on how the thermostat was configured)

  • Heat
  • Off
  • Cool
  • Auto – Operation on page 9.
  • Em Heat – Operation on page 9.

Fan (Fan setting not available for all system types)

  • Auto (Fan only runs with a call for heat or cool, or if set to run with Hum, Dehum, or Vent call)
  • On (fan runs continous)
  • Circulate (fan runs randomly approx. 33% of the time)

If wireless indoor temperature/humidity/motion sensors are used, select which sensors are used for temperature control. You can choose active sensor (ones detecting motion) or manually select which sensors to use.


  • Create new schedule (Set a time-based schedule)
  • Disable schedule
  • Reset to default Schedule

NOTE: To enable geofencing, use the Honeywell Home app.

Devices & Sensors

  • View the temperature and humidity reading from individual sensors
  • Identify a wireless indoor sensor
  • Add a new wireless indoor sensor
  • Remove a wireless indoor sensor

Thermostat information

  • Mac Address
  • IP Address
  • Date Code
  • Model Number
  • Build Date
  • Collection Version
  • Wi-Fi Bootloader Version
  • Wi-Fi Application Version
  • RedLINK Application Version

Equipment Status

  • System mode
  • Heat stages (on or off)
  • Cool stages (on or off)
  • Fan on or off
  • IAQ (Hum, Dehum, or Vent) on or off

Readmore and Download Honeywell T10 Pro Smart User Manual

Title : Honeywell T10 Pro Smart User Manual
Format : PDF
Pages : 35 Pages
Language : English
File Size : 1 MB


Honeywell T10 Pro Smart User Manual

Download PDF