Honeywell T6 Pro Programmable Thermostat Manual

About Honeywell T6 Pro Programmable Thermostat User Guide

Honeywell T6 Pro Package Includes

  • T6 Pro Thermostat
  • UWP Mounting System
  • Honeywell Standard Installation Adapter (J-box adapter)
  • Honeywell Decorative Cover Plate – Small; size 4-49/64 in x 4-49/64 in x 11/32 in (121 mm x 121 mm x 9 mm)
  • Screws and anchors
  • 2 AA Batteries
  • Installation Instructions and User Guide

Honeywell T6 Pro Controls

Honeywell T6 Pro Controls

The screen will wake up by pressing any of the five buttons. If powered by the C wire, the screen stays lit for 45 seconds after you complete changes. If powered by battery only, the screen stays lit for 8 seconds. Depending on how your thermostat was installed, the screen light may always be on.

Honeywell T6 Pro System operation settings

Honeywell T6 Pro System operation settings

  1. Press the Mode button to cycle to the next available System mode.
  2. Cycle through the modes until the required System mode is displayed and leave it to activate.

NOTE: Available System modes vary by model and system settings.

System modes:
‒‒ Auto
‒‒ Heat
‒‒ Cool
‒‒ Em Heat
‒‒ Off

Honeywell T6 Pro Fan operation settings

Honeywell T6 Pro Fan operation settings

  1. Press the Fan button to cycle to the next available Fan mode.
  2. Cycle through the modes until the required Fan mode is displayed and leave it to activate.

NOTE: Available Fan modes vary with system settings.

Fan modes:
‒‒ Auto: Fan runs only when the heating or cooling system is on.
‒‒ On: Fan is always on.
‒‒ Circ: Fan runs randomly about 33% of the time.

Honeywell T6 Pro Set the time and date

Honeywell T6 Pro Set the time and date

Time

  1. Press Menu on your thermostat.
  2. Press + or - to go to TIME. Press Select.
  3. Press + or - to choose between 12 or 24 hour. Press Select.
  4. Use + or - to adjust the hour. Press Select.
  5. Use + or - to adjust the minutes. Press Select to exit Time menu.

Date

  1. If previously setting time, continue to Step
  2. If at the Home screen, press Menu on your thermostat.
  3. Press + or - to go to DATE. Press Select.
  4. Use + or - to adjust year. Press Select.
  5. Use the + or - to adjust month. Press Select.
  6. Use the + or - to adjust day. Press Select to save and exit Date menu.

Honeywell T6 Pro Program Schedule

You can program four time periods each day, with different settings for weekdays and weekends. We recommend the pre-sets (shown in the table below), since they can reduce your heating/cooling expenses.

Honeywell T6 Pro Program Schedule

Wake - Set to the time you wake up and the temperature you want during the morning, until you leave for the day.
Away - Set to the time you leave home and the temperature you want while you are away (usually an energy-saving level).
Home - Set to the time you return home and the temperature you want during the evening, until bedtime.
Sleep - Set to the time you go to bed and the temperature you want overnight (usually an energy-saving level).
NOTE: To temporarily or permanently override any of the above program schedules, see page 4.

Honeywell T6 Pro To adjust program schedules

Honeywell T6 Pro To adjust program schedules

  1. Press Menu on your thermostat.
  2. PROG is displayed. Press Select. Then ON is displayed. Press Select. If you do not want to use a schedule, press or to display OFF. Press Select.
  3. Press + or - to select day or set of days to edit. Press Select.
  4. Press + or -  to select a schedule period to edit (Wake, Away, Home, and Sleep). Press Select.
  5. ON is displayed. Press Select to keep the schedule period on. Or press + and then Select to turn off the schedule period.
  6. Time starts blinking. Press + or - to adjust the schedule period start time. Press Select.
  7. Temperature starts blinking. Press + or - to adjust the “Heat” setpoint temperature. Press Select. Press or to adjust the “Cool” temperature setpoint. Press Select.
  8. Repeat steps 4 through 7 for the remaining schedule periods.
  9. Press Home when you’re finished to save and return to the home screen.
  10. Schedule can be adjusted and turned ON or OFF by returning to Menu and following the steps provided above.

Honeywell T6 Pro Program schedule override (temporary)

Honeywell T6 Pro Program schedule override (temporary)

  1. Press + or - to adjust the temperature.
  2. Once at the desired setpoint temperature, no further action is needed. The new setpoint temperature will be held until the next scheduled time period begins. For more information on schedule time periods, see “Program Schedule” on page 3.
  3. To cancel the Temporary Hold, Press + or - and then press Cancel.

Honeywell T6 Pro Program schedule override (permanent)

Honeywell T6 Pro Program schedule override (permanent)

  1. Press + or - to adjust the temperature.
  2. TEMPORARY HOLD is displayed and the setpoint temperature flashes. While it’s flashing, press Hold (Mode) button to change to Permanent Hold.
  3. To cancel the Permanent Hold, press + or - and then press Cancel.

Readmore and Download Honeywell T6 Pro Programmable Thermostat Manual PDF Below

Honeywell T6 Pro Programmable Thermostat Manual PDF