Honeywell Thermostat Q682C Users Manual

Honeywell Thermostat Q682C Users Manual

Honeywell Thermostat Q682C PREPARATION

  • Check thermostat and subbase (it used) suitability for the heating or heating/cooling system Refer to Table
  • Assemble tools requireet flat blade screwdriver, hand or power drill with 3/16 in. drill bit , wire cutter/ stripper or sharp knife, bubble level or plumb bob and line
  • If subbase or walio ate is mounted on a vertical outlet box order the optional 193121A Cover Plate Assembly (includes cover plate, adapter ring, and screws)
  • Ensure power is off to the heating or heating! cooling system at the main fuse panel. Most buildings have a separate swiich box or circuit breaker for dis- connecting power to the heating and cooling (if appli- cable) equipment.

THIS Honeywell Q682C THERMOSTAT is compatible with virtually all heat- ing or heating/cooling systems. See Table 1 for addi- tional thermostat compatibility iniormation.

Honeywell Thermostat and System Compatibility

TYPE OF HEATING SYSTEM TO BE CONTROLLED CONDITIONS/COMPATIBILITY
Electric (line voltage) typical baseboard and radiant
 
  • The R823901015 Isolating Relay or R841 Silent Switching Center must be installed in the thermostat control circuit a
Electric Furnace_forced air
  • Compatible. Ensure correct subbase identity selected for fan control,
Gas-Direct Spark Ignition (DSI), Intermittent Pllot (IP),
and Standing Pilot (SP)
  • Compatible. Ensure that the 24 V control transformer common is accessible for connection to thermostat cable conductor and power to transformer is not reg- ularly interrupted by high temperature or limit operation.
Heat Pump
  • Compatible. Ensure correct subbase identity selected for fan control and changeover control (O terminal for cool and B terminal for heat).
  • if system with first stage heat pump and gas or oil second stage heat, use conventional recovery models.
  • If system with first stage heat pump and electric second stage heat use ramp recovery model.
Hot Water Zone
  •  Honeywell 2-wire valves are compatible.
  • Some non-Honeywell 2-wire valves will require a R823901015 Isolating Relay in the thermostat control circuit a
  • Some 3-wire valves will require an R8239A1052 so- lating Relay in the thermostat contro circuit a b
Oil
  • Ensure that the 24 V control transformer conmon is accessible for connection to thermostat cable con- ductor and power to transformer is not regularly Interrupted by high temperature, purge cycle, or limit operation
  • If the control transformer commor is not accessible, a separate transformer and TRADELNE wallolate or
Vent Damper
  • Honeywell damper motors are compatible
  • Some non-Honeywell damper motors will require an R823901015 Isolating Relay in the thermostat control circuita Check control amperage regu retieni.
Warm Air Zone
  • Most are compatible.

ReadMore and Download Honeywell Thermostat Q682C Users Manual PDF

Title : Honeywell Thermostat Q682C Users Manual
Format : PDF
Pages : 8 Pages
Language : English
File Size : 1 MB

 Honeywell Thermostat Q682C Users Manual