Honeywell VisionPRO® 8000 Thermostat Installer Manual
Honeywell VisionPRO® 8000 Installer Test
The Installer Test is part of the Installer Setup Menu.
1. Enter the Installer System Test by entering the Installer Setup and pressing t repeatedly until “Test” appears.
2. Use arrow to change test and system status as required.
3. Press DONE to exit.
Honeywell VisionPRO® 8000 system tests
Test the system’s heating, cooling, fan and emergency heat. Available tests vary by thermostat and system type.
Readmore and Download Honeywell VisionPRO® 8000 Thermostat Installer Manual PDF Below