Honeywell VisionPRO® TH8000 Series

About Honeywell TH8110U1003 Vision Pro 8000 Digital Thermostat

Congratulations! You’ve just purchased the world’s most advanced, easy-to-use thermostat. It has been designed to give you many years of reliable service and touchscreen climate control.

Honeywell TH8110U1003 Vision Pro 8000 Series Features

  • 7-day program schedules maximize comfort and economy.
  • Armchair programming: Just pull thermostat from the wall to set schedules.
  • Energy-saving settings for maximum cost savings.
  • One-touch temp control overrides program schedule at any time.
  • Precise comfort control keeps temperature within 1°F of the level you set.
  • Change/check reminders let you know when to service or replace filters, batteries and other critical components.
  • Large touchscreen display with backlight is easy to read—even in the dark.
  • Select models display and control summer humidity.
  • Select models accommodate optional outdoor or indoor remote sensors.

Honeywell Vision Pro 8000 Series Table of Content

Your new thermostat is pre-programmed and ready to go. Just set the time and day. Then check the settings below and change if needed:
1. Set clock................................................................................................See page 6
2. Select fan setting: Preset to Auto....................................................... .....See page 7
3. Select system setting: Preset to Heat.......................................................See page 8
4. Program schedules: Preset to energy-saving levels
 while you’re at work or asleep (assumes you
wake at 6 am, leave at 8 am, return at 6 pm
and go to bed at 10 pm)....................................................................       ....See pages 10-13

Honeywell Vision Pro 8000 Quick reference to status display

Honeywell Vision Pro 8000 Quick reference to status display

Honeywell Vision Pro 8000 Series Quick reference to controls

Honeywell Vision Pro 8000 Quick reference to controls

Honeywell Vision Pro 8000 Series Clock setting

To set the current time display, press CLOCK, then press Up or Down to adjust the time. Press and hold s or t to advance the time more quickly.
Press DONE to save & exit (or press CANCEL to exit without changing the time).
Note: The real-time clock should never require adjustment since it automatically updates for daylight savings time, and stores all date/time information.
Note: To change the current week day display, see page 22.

Honeywell Vision Pro 8000 Clock setting

Honeywell Vision Pro 8000 Series Fan setting

Press FAN to select fan operation, then press DONE.

  • On: Fan is always on.
  • Auto: Fan runs only when the heating or cooling system is on.
  • Circ: Fan runs randomly, about 35% of the time, not counting any run time with the heating or cooling system.

You can press FAN to override the fan settings you’ve programmed for different time periods (see page 11). If you select On or Circ, the setting you select will remain active until you press FAN again to select Auto (see page 27 for more information).

Note: If a fan schedule is programmed, “Auto” will run the fan schedule.

Honeywell Vision Pro 8000 Series Fan setting

Readmore and Download Honeywell VisionPRO TH8000 Series Manual PDF Below

Honeywell VisionPRO® TH8000 Series