LUX KONOzw (KN-ZW-WH1-B04) Operating Manual

LUX KONOzw (KN-ZW-WH1-B04) Operating Guide

Table of Contents

1. MODELS
2. P ACKAGE C ONTENTS
3. ITEMS N EEDED FOR I NSTALLATION
4. SPECIFICATIONS AND C OMPLIANCE
5. CONNECTING P OWER /I NSERTING B ATTERIES
6. SYSTEM INCLUSION/ EXCLUSION
   • Steps of Adding the Device (Device Inclusion)
   • Steps of Removing Device (Device Exclusion)
   • Error code and description
   • Z-Wave Command Classes
   • OTA Firmware Upgrade
7. INSTALLATION
8. CONFIGURE SYSTEM AND D ISPLAY SETTINGS
9. KEYPAD LOCK
10. D EVICE RESET
    • Factory Reset
    • Hardware Reset
11. TROUBLESHOOTING
12. M ANUFACTURER CONTACT I NFORMATION
13. DISPOSAL
14. INSTRUCTIONS
15. WARNING I NFORMATION

About LUX KONOzw (KN-ZW-WH1-B04)

1. MODELS
   • KONOzw Smart Hub Thermostat
2. P ACKAGE CONTENTS
   • Device
   • Wall Plate
   • Mounting Hardware
   • 4 AA Alkaline Batteries
   • Installation Manual
   • Wire Labels
3. ITEMS NEEDED FOR INSTALLATION
   • Phillips Screwdrivers
   • Wire stripper/cutter
   • A Z-Wave Hub / Gateway to operate with KONOzw
4. SPECIFICATIONS AND COMPLIANCE
   • Operating Voltage: 24VAC
   • Battery Type: 4 AA premium brand Alkaline
   • Operating Temperature: +14F to 122F (+10C to 50C)
   • Operating Humidity: 20% to 80% (non-condensing)
   • Certifications: Z-Wave Plus
5. CONNECTING POWER/I NSERTING B ATTERIES
   KONOzw needs either one of the power source options:
   • C-terminal: C-terminal Separate KONOzw from its base. Pull the wires from your wall through the center hole of the KONOzw base. Secure the base to the wall using the include mounting hardware
   • Battery (4 AA alkaline batteries included)
6. SYSTEM INCLUSION
   During the initial setup, you will be prompted to pair the device with your home control system. If you choose
   not to pair during the initial setup process, you can manually initiate the inclusion process at any time by
   following these steps:
   • Steps of Adding the Device (Device Inclusion)
     1. Initiate inclusion on your home control system using the instructions provided with it
     2. In HOME screen, press the knob once to enter the menu settings
   • Rotate the knob to select Wifi Icon , then press the knob to enter the inclusion/exclusion menu
   • In the inclusion/exclusion menu, select ADD and press the knob to confirm
     The device will begin the adding process – you will see this screen:
     Step 1: Device prepares to add to the hub
     Step 2: At the hub portal, click “Add device”
     Noted: If the hub is supporting S2 (authenticated) security mode, it will ask the user to provide the DSK code of the device to complete the inclusion process. Input the first 5 digits in the hub portal and follow the instructions provided by the hub. Remove the décor snap cover from the device and the product label is attached on the device front housing. There is also the same product label attached on the product gift-box. If S0 or S2 (unauthenticated) is used, no DSK is needed then.
     Step 3: Device is added to the hub successfully.
   • The device will automatically return to the HOME screen after 5 seconds, or you can press the knob to return to the HOME screen.
   • If the inclusion process is not successful, then the HOME screen will display ER:02 to indicate the error. Press and hold the knob for over 5 seconds to return to the inclusion/exclusion menu and retry the inclusion.

Readmore and Download LUX KONOzw (KN-ZW-WH1-B04) Operating Manual

Title	: LUX KONOzw (KN-ZW-WH1-B04) Operating Manual
Format	: PDF
Pages	: 19 Pages
Language	: English
File Size	: 1 MB