Trane Electronic Heat-Pump Thermostat TAYSTAT 570 Owners Guide
Trane Electronic Heat-Pump Thermostat TAYSTAT 570 FEATURES
The Trane Co. sells comfort systems. Comfort is achieved through matching the correct equipment and controls. This thermostat is designed to provide the maximum comfort for your needs. Some of the basic offerings are:
- Simple and easy to use. The UP and Down keys make it easy for you to change your temperature setting.
- Large digital display. You can easily read the current room temperature at a glance.
- No need for batteries. Batteries are not required because your temperature settings are held permanently in memory.
Trane Electronic Heat-Pump Thermostat TAYSTAT 570 Troubleshooting
|
Symptom |
Action |
|
Heating or Cooling will not come on. |
Check that the SYSTEM switch on the thermostat is set to Heat or Cool. Check if the circuit breaker is tripped—reset the circuit breaker. Check if the fuse is blown—replace the fuse. Check for air movement at the register. Check power to the heating or cooling equipment. |
|
Temperature setting is too warm or cool. |
Adjust the temperature by pressing either the ▲ or ▼ key. |
Trane Electronic Heat-Pump Thermostat TAYSTAT 570 SETTINGS
Setting SYSTEM and FAN Switches
System and fan settings are controlled by using SYSTEM and FAN switches located on the bottom of the thermostat case.
First set the SYSTEM switch:
Cool: Normal setting for months when your home needs cooling (air conditioning). Digital display shows a snowflake when cooling is on.
Off: Both heating and cooling are off.
Heat: Normal setting for months when your home needs heating. Digital display shows a flame when heating is on.
Em. Ht.: Switch to this setting when your home needs heat, but your equipment needs servicing or is not working properly. In this mode, the thermostat controls only the backup heat. The heat pump is off.
Then set the FAN switch:
Auto: Normal setting for most homes. Some systems may delay the fan turning on and off with the equipment.
On: The fan runs continuously. Use for improved air circulation and air quality.
Emergency Heat
The Emergency Heat feature allows you to turn on the electric heat section of the system by moving the system switch to the Em. Ht. position. The 
indicator flashes and points to Em Ht when the system is in emergency heat mode. The indicator may also point to Aux Ht if the system calls for additional back-up heating.
Auxiliary Heat
The auxiliary heaters assist the heat pump under normal conditions when low outdoor temperature occurs. The indicator points to Aux Ht when the auxiliary heating equipment operates.
Readmore and Download Trane Electronic Heat-Pump Thermostat TAYSTAT 570 Owners Guide
| Title | : Trane Electronic Heat-Pump Thermostat TAYSTAT 570 Owners Guide |
| Format | |
| Pages | : 12 Pages |
| Language | : English |
| File Size | : 1 MB |
